My Noogee

Posts Tagged ‘Lower electric bills’

When you are living on a budget and trying to cut costs, lowering your monthly bills is definitely one of the first things that comes to most of our minds. We try to figure out how we can spend less money on food, how we can cut transportation costs, and how we can make our utility bills lower.

Everyone would like to have a lower electric bill. Here are a few things you could do to try and cut down on the amount of electricity you use, and therefore make your bill more manageable.

Turn out your lights when you are not using them. Make sure that when you leave the house, you leave on the minimum number of lights necessary. You may need to leave on one or two for safety reasons, to make the house look occupied or to be able to see when you get home. But you do not need to leave all of the lights in the house on.

Set your computer to an energy-saving mode. All computers can be adjusted so that they go into sleep mode when they are not used for a certain amount of time. This will allow you to save energy without having to re-boot your computer each time you want to use it.

Unplug your cell-phone charger when it is not in use. Even if there is no phone attached, your charger is still using electricity if it is plugged in.

Install energy-saving light bulbs. They will help you to cut costs even when the lights are on.

If you have children, set limits on the number of electrical devices they may use at once. No one needs to have the television, the computer, and the radio all on at the same time.

These are a few of the ways that you can save energy and help lead your household toward a lower electric bill. This will contribute to your efforts to save money in all areas of your budget.

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

Revenue So, you’re a CEO, CFO or COO of a company struggling to generate demand for your products or services. You decide on a new or tweaked strategy that will get your revenue on the right track, back to growth or new areas for growth. You implement the changes. While efforts are continuing to make the behavioral and tactical improvements to achieve the goals and objectives you have set forth in your strategy, you begin to look further into what else can be done to improve the company financials.

Profitability Whether or not your company is grappling with revenue issues, you and your Board are always interested in ways to improve profitability. You look more closely at where you can cut the fat, if there’s any left to cut. Your largest operating expense is your employees. Like many companies in America in the recent and not so recent past, you consider starting a new round of budget cuts in salaries, benefits and even people. Can you really afford to cut or possibly discourage your troop’s way to more productivity?

Energy Expenses If you house your organization in expansive facilities, another large operating expense is your monthly/yearly/ever-present electric bill. What can you do about that, the power company has a monopoly in your geography as it does in most. The least expensive steps you can take are to ask employees to turn-off lights and reduce the comfort level of the thermostat setting. Have you ever walked into a government, commercial or industrial build that is dimly lit or is too warm and stuffy, or even too cold during the winter. Not a very attractive place to visit, let alone work.

Technical Solution to a Financial Problem You may want to consider the things you can do to reduce your power consumption that give you an attractive payback and ROI. Treating your motors, lighting, HVAC and refrigeration systems can give you the best bang-for-your-buck, when the proven approaches and technologies are engineered and installed properly. It may also help your decision to move forward with such a project if it is guaranteed every step of the way, including your continued savings after the installation and throughout your payback period. In terms of savings, the project should result in the gift that keeps on giving, for a couple of decades.

Caveat Emptor Words of caution, when considering such a solution, make sure that you award your project to an engineering firm with experience in designing, installing and guaranteeing your project and results. And be certain you are not hiring a performance contractor or a company that has you sign a long-term contact sharing in your savings for a decade or more by replacing your hardware with insufficient new motors, lighting, HVAC or refrigeration. Otherwise, you could be better off dimming the lights yourself!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

categories: energy edge technologies,Lower electric bills,Lower electric bills for hotel,Lower electric bill for hospitality,Energy efficiency hotel,Energy efficiency hospitality,Energy conservation hotel,Energy conservation hospitality,Save energy hotel

In today’s economic world, with a global recession affecting most nations, it’s important to cut down on costs wherever possible. This is especially true for large corporations, where the imperative is to try to save money, preserve profit and keep job losses at a minimum. One of the most common ways to cut expenses is to try and reduce the company electric bill where they can.

There are several ways to save on electricity. The most common one is to make sure the office lights are turned off when they’re not needed. The light bulbs can also be changed to low-energy models or compact fluorescent or LED bulbs. Air conditioning and heating shouldn’t be used excessively and should be maintained and serviced regularly.

Programmable thermostats should be used in office buildings and access should only be given to certain people. Getting an energy audit may also help and asking the electric company itself on how to cut down on electricity is a good idea.

When a computer isn’t being used it should be turned off or placed in standby or hibernation mode. Doors and windows should be checked for cracks and leaks as this can let in both hot and cold air depending on the season. Cell phone chargers and microwave ovens and other electrical consuming devices should be unplugged or placed on bypass as well when they’re not in use.

Depending on where you operate, you may also have the option of changing service providers. If this is possible, check out the rates of all electricity and gas providers in your area. You will of course, want to go with the cheapest rates possible without jeopardizing service quality.

It’s a good idea for businesses to calculate their electricity cost if they want to save on company electric bill. If they know exactly how many kilowatt hours are being used up it will help. They can also check out the internet for articles and tips on how to reduce their costs. Many of these tips can then be integrated into their energy-saving plans.

Ultimately, a professional energy services company or engineering firm will be a valuable resource once you have picked off the low hanging fruit mentioned above. These companies can help you design and implement long term strategies and technologies to significantly reduce your energy consumption and corresponding costs.

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

Methods and techniques that reduce the energy level required to produce the same level of service from the energy. The term energy efficiency means achieving more results from the same effort. Sometimes, efficiency can be translated into dollars and cents. It is measurable in terms of watts of visible light, or units of heat or degrees or cooling required.

Energy production has taken the path of attempting to produce more energy from the same components, as evidenced by nuclear power plants. This concept is the opposite of efficiency. Efficiency in energy usage studies how to get more benefit from existing energy sources.

Any entity that uses energy, whether it is an automobile, light bulb or huge manufacturing complex can be a target for reducing the amount of energy that is required to operate the entity. Installing skylights instead of additional light fixtures is efficiency at work. Making automobiles that get more miles per gallon is another way to make better use of energy. Trapping the heat from manufacturing processes and using it for building heat is another example of being energy efficient.

Efficient use of available energy helps to address the problem of dwindling resources and sky rocketing costs. New oil fields may be found beneath the earth’s crust, but they are still a finite energy source. By creating a more efficient use for oil, the reserves will last longer.

Since the 1970s, more effort has been expended in making building codes more energy conscious. Individual efforts are helpful but are less certain to create efficiency in the uses of energy. Studies have found that up to 75 percent of the energy used in the United States today could be eliminated through simple measures that are not costly or burdensome.

A three-fold process for increasing energy efficiency places efficiency first, use of renewable resources second and new fossil power sources in third place. The benefits are not only in non renewable resource protection, but in the cost per unit of electrical power produced and delivered. Ultimately, efficiency in both cost and service should be the goal of a technologically advanced and energy conscious society.

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

Today’s energy conscious climate has motivated many to do what they can to become more efficient and conserve energy and money. Unfortunately this same climate has prompted others to take advantage of unsuspecting consumers’ wishes to save energy and reduce expenses.

Companies that tout power factor improvement (kVAR correction) and transient voltage suppression are a good example of this bad trend. Lately we are seeing more and more of these companies cropping up and feel it is time to set the record straight.

First, transient voltage surge suppression (TVSS) plays a valuable role in improving power quality to protect sensitive equipment inside a facility. However, TVSS does not save energy. TVSS’s are only active a tiny fraction of a second to protect against voltage surges which only last for less than a millisecond. To actually reduce energy consumption the TVSS would need to actually cut power consumption for an extended period of time which is not what they are designed to do. Again, TVSS is important to protect sensitive electrical equipment but buyers should avoid vendors promising, or even guaranteeing, that they will reduce energy consumption.

Now what about vendors who claim that improving power factor will save 15% or 20% or 30% of energy consumption and corresponding cost? This one is a little trickier.

For residential applications, power factor does nothing to save energy because the typical home already has an average power factor of about 0.97 which is almost the perfect power factor of 1 or unity. In addition, the device (called a capacitor) is placed at the main circuit breaker. According to IEEE 5.5.3.3 capacitors must be situated at or near the respective inductive loads to reduce power system losses by reducing heat and distribution losses known as I2R losses.

So what about commercial and industrial facilities using power factor correction to reduce energy costs? It is perfectly appropriate for a company that is incurring penalties or a kVA billing structure from the utility company to improve the facility’s overall power factor by employing a capacitor bank at the main service entrance or individual capacitors at or near the respective motor loads. Doing so will eliminate the power factor penalties and/or reduce the kVA demand charges on the utility bill which can save significant money and provide a significant ROI on the investment.

But what about power factor correction reducing kWh consumption? IEEE also tells us that I2R losses only account for 2 to 5% of the total load in a facility. Simple math tells us that it would be against the laws of physics to get the 15% to 30% energy reduction claimed by some vendors. Think about it. Even if your facility had 5% distribution losses and you could correct 100% of the problem via power factor correction at every load (which can’t be done) you would still only save 5% at the most. No where near the claims of some capacitor vendors and manufacturers.

All that said, power factor correction when done properly will eliminate utility penalties and kVA demand charges, improve facility power quality, increase electrical system capacity, and save a little energy when applied to the appropriate motor loads.

So make an investment in transient voltage surge suppression and power factor correction when appropriate and necessary. But caveat emptor!

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

categories: Robert Holdsworth,Energy efficient buildings,Lower electric bills,Green buildings,Lease energy projects,Free energy audits,Energy project,Building energy efficiency,Commercial energy efficiency,Industrial energy efficiency,Energy efficiency consulting

Hospitals and Medical Centers have many opportunities to significantly reduce and manage their energy costs while maintaining or even improving patient care and comfort.

Healthcare facilities are significant energy consumers, typically using an average of 28 kWh and 110 cubic feet of gas per square foot. HVAC (including cooling and space heating) represents about 62% of hospital energy use with lighting comprising 13% more. Focusing on these two areas with their combined 75% of total energy usage is very useful for developing an energy efficiency plan.

However, knowing where to focus does not mean it is always clear exactly where to start. By taking a carefully planned “whole facility” approach, it is easier to feel confident that you are making the best, most financially and operationally prudent energy efficiency choices for your unique facility. In today’s industry there are proven and recommended engineering approaches and technologies available that can guarantee results. And by working with an experienced, energy services company or engineering firm, choosing the right options does not need to be complicated.

The best first step is always to focus on quick, low cost or no cost solutions. This can include training staff to turn lights off when they leave unoccupied rooms, using sleep mode settings for computers when not in use, shutting off AHUs that serve unoccupied areas at night such as cafeterias, offices, conference rooms, etc, using programmable thermostats in rooms and areas not occupied 24 Hrs / day to turn up or down temperatures in different seasons, and having the HVAC systems serviced and cleaned on a regular basis. After you’ve addressed the “low hanging fruit”, next steps can involve choosing from a variety of longer term options that are designed to deliver much greater energy savings. Options should be considered based on their proven track record of success, whether they are “Approved” or “recommended” by organizations such as Energy Star, US DOE, USGBC, IEEE, etc., their cost effectiveness and return on investment as well as consistency with your hospital’s goals and culture Experience has shown that some of the better programs for hospitals include lighting upgrades to high efficiency fluorescent, CFL and/ or LED, use of occupancy sensors and day-lighting opportunities , sine wave modification for lighting circuits, liquid pressure amplification for central chiller plants, energy management based on occupancy, anti-compressor short cycling for roof top units, demand controlled ventilation, use of variable frequency drives and possibly equipment replacement for older systems that are approaching the end of their useful life. As you move forward with this, it helps to know that you don’t have to do it alone. There are experienced firms who can help make recommendations and provide turnkey services for you. In choosing a partner to guide this type of “whole facility” approach for you, it is important to look at a number of factors. You may want to ask the following: What is their level of experience using these various technologies, do they use proven and recommended approaches, what are the credentials of their staff, are they members of key industry organizations, what is their level of knowledge of your industry, do they offer a free initial evaluation and do they offer guarantees at each step of their process.

And remember that the sooner you begin, the sooner you start saving your hospital’s valuable and limited resources.

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

Office buildings are significant energy consumers using an average of 17 kWh of electricity and 32 cubic feet of gas per square foot. Moreover, industry data indicates that energy costs are 20% of the typical facility’s annual operating budget.

As energy costs continue to increase, businesses are discovering the tremendous financial, operational and competitive value of energy cost reduction and improved energy efficiency.

Because HVAC and lighting comprise 65% of combined energy use in office buildings (47% and 18% respectively), they are where you should initially focus your energy reduction efforts. By centering on these key areas, companies have significantly improved energy efficiency while maintaining or improving occupant / employee comfort and productivity.

Because each facility is relatively unique, using a carefully planned “whole facility” approach, allows you to be confident that you are making the best, most financially and operationally prudent energy efficiency choices. You will find there are proven and recommended engineering approaches and technologies available that can guarantee results and by working with an experienced, energy services company or engineering firm, choosing the right options does not need to be complicated. Deciding where and how to begin can be fairly straightforward. The best first step is always to focus on quick, low cost or no cost solutions. This can include training staff to turn lights off when they leave unoccupied rooms, using occupancy sensors in offices, conference rooms, etc., using sleep mode settings for computers and other electronics when not in use, setting back thermostats during overnight and closed hours and having the HVAC systems serviced and cleaned on a regular basis. After you’ve addressed the “low hanging fruit”, next steps can involve choosing from a variety of longer term options that are designed to deliver much greater energy savings. Options should be considered based on their proven track record of success, whether they are “approved” or “recommended” by organizations such as Energy Star, US DOE, USGBC, IEEE, etc., their cost effectiveness and return on investment as well as their consistency with your company’s goals and culture. Some of the best options for office buildings include lighting upgrades to high efficiency fluorescent, CFL and/ or LED, use of occupancy sensors and day-lighting opportunities, sine wave modification for outdoor lighting circuits, liquid pressure amplification for central chiller plants, anti-compressor short cycling for roof top units, use of variable frequency drives, building management systems, reflective roof coatings and possibly equipment replacement for older equipment that is approaching the end of its useful life.

As you proceed with implementing energy efficiency measures, know that you don’t have to do it alone. There are experienced firms that can help make recommendations and provide turnkey services for you. In choosing a partner to guide this type of “whole facility” approach for you, it is important to look at a number of factors. You may want to ask the following: What is their level of experience using these various technologies, do they use proven and recommended approaches, what are the credentials of their staff, are they members of key industry organizations, what is their level of knowledge of your industry, do they offer a free initial evaluation and do they offer guarantees at each step of the process. Remember, the sooner you begin, the sooner you start saving your organization’s valuable and limited resources and improving your company’s profitability!

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

Everyone these days is taking a second glance at their utility bills and starting to consider alternative options to lower them. Companies are trying to find ways to cut costs without cutting their staff, benefits, or pay packages. Energy bills have been rapidly increasing and causing even large companies to start thinking of ways to reduce them. If you are trying to save on your company electric bill, here are a few ideas to consider:

A typical building will use most of its energy for heating and cooling purposes. This usually accounts for about 45% of your bill. Since this is the biggest controlling factor, it is a good place to start.

If you can not afford a large scale building management system, try programmable thermostats. Programmable thermostats have been noted to save users up to 30% on their heating and cooling costs. These little devices allow you to program its setting to automatically adjust the temperature at certain times during the day and also when the outside temperature changes. To get the most bang for your buck, look for the Energy Star label on thermostats.

During the summer, you can make use of fans to keep the air flowing. This will make the room feel cooler and allow you to keep the thermostat at a slightly higher setting. Every degree you can keep the temperature setting higher in the summer and lower in the winter will add up to significant savings.

Lighting is another huge chunk of your energy bills, particularly in large business that use a lot of lights or offer 24 hour service. While CFL or LED bulbs are initially much higher in cost than traditional bulbs, they will last up to ten times longer and use 75% less energy! In the end, you will be more than getting your money back out of these light bulbs.

If you are serious about reducing your energy costs, you will need to reach for higher hanging fruit and you should hire a professional energy auditor or engineering firm. Your utility company may even provide a high level energy audit for no initial cost. An auditor or engineer will do a thorough inspection of your entire business and find ways to shrink your utility bills by eliminating unnecessary energy usage and waste. This could prove to be one of the most valuable steps you ever take to reducing your energy costs.

The energy cost center is the easiest to positively impact on any company’s P&L. So get started today!

LEED Certified and Green Technology, Energy Edge Technologies can help save your Industrial, Hospital, Grocery Store or any other high energy commercial buildings massive amounts of money! We Take A Full Facility Approach or call 888-729-5722 Ext. 100.

categories: William Poulos,energy edge technologies,Lower electric bills,Lower electric bills for hotel,Lower electric bill for hospitality,Energy efficiency hotel,Energy efficiency hospitality,Energy conservation hotel,Energy conservation hospitality

There are plenty of things you can do to demonstrate better energy efficiency. Everyone knows the big ones such as recycle and turn off the lights. But there are other small things that can really add up. They may seem odd or like slight inconveniences, but the small magnitude of the inconvenience will completely disappear once it becomes a part of your regular schedule.

The first thing is to unplug all chargers when you are done with them. Many people have their cell phone, camera, or MP3 chargers in the same spot, always ready to go for convenience purposes as we are all always rushing out the door. However, leaving something just simply plugged in can drain electricity and at the same time serves no purpose.

Another thing would be to car pool or take public transportation. These are likewise inconveniences to many people, especially on days when they are running late. However, sticking to a schedule like this may actually make you more punctual and aware of your time. It also can be much cheaper for you. Your car will last longer and your petrol bill will go way down.

You should also start recycling the little bits of plastic you may not even realize can be recycled. For example, many people just throw away the plastic trays from TV dinners. This is hugely impractical, since they can be easily rinsed out and recycled.

Many people throw away lots of little bits of paper like sticky notes, or bits of plastic, like from a candy wrapper. This plastic is merely going to sit in a land fill. Why not put it to good use? These things all add up, so we need to be smart about them. If everyone merely took a step back and looked at what they were really wasting–and knew the life of an object after it was thrown away–people would save so much more in terms of recycling and reusing

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.

In today’s energy climate more and more people have become motivated to accomplish what they can to become more energy efficient to conserve energy and money. Regrettably this same climate has encouraged some to take advantage of innocent consumers’ desires to save energy and reduce operating expenses.

Vendors that advertise power factor improvement (kVAR correction) and transient voltage suppression to save energy are a good case in point of this bad trend. Recently we are seeing more and more of these businesses cropping up and we believe it is time to set the record straight.

First off, transient voltage surge suppression (TVSS) plays an important part in improving power quality to guard sensitive equipment inside a facility. However, TVSS does not save energy. TVSS’s are barely active an infinitesimal portion of a second to defend against voltage surges which only last for less than a millisecond. To actually decrease energy use the TVSS would need to essentially cut power consumption for an extended amount of time which is not what they are designed to do. Again, TVSS is essential to protect susceptible electrical equipment but consumers should steer clear of vendors promising, or even guaranteeing, a reduction in energy consumption.

And what about salespeople who maintain that increasing power factor will save 15% or 20% or 30% of energy consumption and resultant costs? This is false but also a bit trickier.

For homes, power factor correction does zero to save energy because the average home already has an average power factor of approximately 0.97 which is nearly the perfect power factor of 1 or unity. Additionally, the unit (called a capacitor) is installed at the homes main circuit breaker. According to IEEE 5.5.3.3 capacitors must be located at or near the individual inductive motor loads to decrease power system losses by reducing heat and distribution losses known as I2R losses.

So what about commercial and industrial facilities looking to use power factor correction to shrink energy expenditures? It is completely appropriate for a business that is incurring penalties or a kVA billing structure from the utility company to improve the facility’s overall power factor by installing a capacitor bank at the main electrical service entrance or individual capacitors at or near the particular motor loads. Doing so will do away with the power factor penalties and/or reduce the kVA demand charges on the electric bill which can save considerable money and provide a significant ROI on the investment.

But what about power factor correction reducing kWh consumption? IEEE also tells us that at most I2R losses only account for 2 to 5% of the total load in a facility. Simple arithmetic tells us that it would be in opposition to the laws of physics to obtain the 15% to 30% energy reduction claimed by some vendors. Consider it. Even if your facility had 5% distribution losses and you could correct 100% of the predicament via power factor correction at every load (which can’t be done) you would still save no more than 5% at most. No where close to the claims of some capacitor reps and manufacturers.

All that said, power factor correction when done appropriately will eliminate utility penalties and kVA demand charges, improve facility power quality, increase electrical system capacity, and save a modicum of energy when applied at the proper motor loads in an industrial facility.

So make an investment in transient voltage surge suppression and power factor correction when appropriate and necessary. But caveat emptor!

Save Money On Your Company’s Energy Bill, visit Energy Edge Technologies site for strategies on saving a tremendous amount of capital on your Corporate Energy Bill or call 888-729-5722 Ext. 100.